LEAK DETECTORS
Find the Leak. Stop the Waste.
Water leaks are not always easy to see. Leak-detection devices can help identify water problems earlier, giving homeowners and businesses an opportunity to investigate the problem, reduce water waste, and limit possible property damage.
π What Is a Leak Detector?
A leak detector is a device that helps identify water where it should not be or water use that appears unusual.
There is an important difference, however: not all leak detectors work the same way.
For this guide, we will look at two common approaches: moisture-sensing leak detectors and flow-monitoring devices.
π§ Two Types of Leak Detection
Before learning how to use a detector, it is important to know which type you have.
TYPE 1: Moisture-Sensing Leak Detector
A moisture-sensing detector is a small device placed near an area where a leak might occur.
When leaking water reaches the detector’s sensor, the device can sound an alarm. Some connected models may also send a notification.
TYPE 2: Flow-Monitoring Device
A flow-monitoring device takes a different approach. Instead of waiting for water to reach a sensor, it monitors water moving through the plumbing system.
Depending on the system, unusual water-use patterns can trigger an alert. Some products may include additional features such as automatic shutoff.
Two different technologies. One goal: find leaks before more water is wasted.
π¦ How to Use a Moisture-Sensing Leak Detector
These instructions are for the small detector that you place near a sink, toilet, appliance, water heater, or other leak-prone area.
Exact setup varies by product, so always follow the manufacturer’s instructions.
Choose a Leak-Prone Location
Choose an area where leaking water could collect, such as under a sink, beside a toilet, near a washing machine, or near a water heater.
Power the Detector
Install the battery, charge the detector, or connect it to power according to the manufacturer’s directions.
Place the Sensor Correctly
Position the detector so its sensing area is where leaking water is likely to reach it. Avoid locations where normal splashing or cleaning water could repeatedly trigger the alarm.
Test the Detector
Use the testing procedure provided by the manufacturer to make sure the alarm or notification system works properly.
Respond to an Alert
If the detector sounds or sends an alert, inspect the area immediately. Locate the source of the water and address the leak safely.
π Where to Place a Moisture Detector
Moisture detectors work best when they are positioned close to places where leaking water is likely to appear.
Near supply lines, shutoff valves, drains, and the bottom of the cabinet.
Near the toilet supply connection or an area where leaking water could reach the floor.
Near the water-supply hoses and connections.
Near the base where unexpected water could collect.
Near dishwashers, refrigerators with water lines, and similar equipment.
π° How to Use a Flow-Monitoring Device
These instructions are for a device that monitors water flowing through the plumbing systemβnot a small sensor placed on the floor.
Flow-monitoring systems vary by manufacturer. Some may require professional installation, so always follow the instructions for your specific device.
Install the Monitoring Device
Install the device in the location specified by the manufacturer. Use a qualified professional when required.
Complete the Setup
Follow the manufacturer’s setup process. A connected system may require an app, account, network connection, or other configuration.
Let the Device Monitor Water Use
Once operating, the device monitors water flow. Depending on the product, it may identify patterns that suggest unusual water use.
Pay Attention to Alerts
If the system identifies unusual water use, investigate the alert and determine what is causing the water use.
Take Action
Locate the source, stop the water if appropriate and safe, and arrange for repairs. If your system includes automatic shutoff capabilities, understand how that feature operates before relying on it.
π€ Which Type Am I Using?
You are most likely using a moisture-sensing leak detector.
You are using a flow-monitoring device.
Both can help identify leaks, but they detect the problem in different ways.
π Another Way to Check for a Hidden Leak
You don’t need an electronic detector to perform a basic leak check.
EPA recommends checking your water meter before and after a two-hour period when no water is being used.
If the meter changes during the test, EPA says you probably have a leak.
π Why Leak Detection Matters
According to EPA WaterSense, the average household’s leaks can account for more than 9,300 gallons of water wasted every year.
Gallons of Water Per Year
Potentially wasted by leaks in the average household.
Finding leaks early can prevent unnecessary water waste.
Early detection may help reduce damage caused by leaking water.
EPA reports that fixing easily corrected household leaks can save homeowners about 10 percent on their water bills.
β οΈ A Detector Alert Is a WarningβNot the Repair
Whether the warning comes from a moisture detector or a flow-monitoring system, the next step is to investigate.
1. Determine where the water is coming from.
2. Stop the water supply when appropriate and safe.
3. Clean up standing water to help prevent additional damage.
4. Repair the source of the leak or contact a qualified professional.
5. Make sure the detection system is working again after the problem has been corrected.
The Planeteers Leak Detector Challenge
Walk through your home, school, or workplace and identify three locations where a water leak could go unnoticed.
Then decide which technology would make sense: a moisture detector at the location or a system that monitors water flow.
Find it early. Fix it quickly. Save water.
π Every Drop Counts
Water conservation isn’t only about turning off the faucet. It also means finding water that is being wasted when nobody intended to use it.
Moisture detectors can provide an early warning when water appears in a specific location. Flow-monitoring devices can help identify unusual water use within the plumbing system. Understanding the difference helps you choose and use the right tool.
Detect it. Investigate it. Fix it. Save water.
π Sources & Learn More
U.S. Environmental Protection Agency.
Leak Detection and Flow Monitoring Devices.
EPA WaterSense: Leak Detection & Flow Monitoring β
U.S. Environmental Protection Agency.
Fix a Leak Week.
EPA WaterSense: Fix a Leak Week β
The Planeteers β’ Every Drop Counts